Vertiv 24BA1200-23 Installation Manual page 18

Figure 7:
Installing Batteries into Battery Shelves (588810200)
Connect Link Furnished
with Battery to these
Two Terminals
Connect NEG (-)
Battery Cable
to this Terminal
(string 1)
Note:
1. One tray shown as example.
2. Cabling detail omitted.
1/4" Ground
Washer
(1 Place)
Vertiv | NetSure Battery Rack System (+24 VDC) Installation Manual (Section 6044) | Rev. E
Connect NEG (-)
Battery Cable
Connect POS (+)
to this Terminal
Battery Cable
to this Terminal
(string 1)
1/4-20 X 2/8" Bolt
1/4" Ground Washer
(1 place)
Battery Retention Bracket.
See Detail A for alternate orientation.
DETAIL A
Alternate Orientation
of Retention Bracket
Connect Link Furnished
(string 2)
with Battery to these
Two Terminals
1/4-20 X 5/8" Bolt
1/4" Lock Washer
1/4" Flat Washer
(3 places)
10-32 x 1/2" Pan Head Screw (3 Places)
No. 10 Flat Washer (3 Places)
No. 10 Lock Washer (3 Places)
Spacer (3 Places)
Connect POS (+)
Battery Cable
to this Terminal
(string 2)
Spacers
Separate
Batteries
(3 places per tray,
front and back)
If trays are equipped with
circuit breakers, TURN OFF ALL
circuit breakers before installing
and connecting any batteries!
1/4-20 x 5/8" Hex
Head Screw
(4 Places)
1/4-20 Lock Washer
(3 Places)
1/4-20 Flat Washer
(3 Places)
18