Figure 6:
Installing Batteries into Battery Shelves (588810100)
Connect Link Furnished
with Battery to these
Two Terminals
Connect NEG (-)
Battery Cable
to this Terminal
(string 1)
Note:
1. One tray shown as example.
2. Cabling detail omitted.
1/4" Ground
Washer
(1 Place)
Vertiv
| NetSure Battery Rack System (+24 VDC) Installation Manual (Section 6044) | Rev. E
Connect NEG (-)
Battery Cable
Connect POS (+)
to this Terminal
Battery Cable
to this Terminal
(string 1)
1/4-20 X 2/8" Bolt
1/4" Ground Washer
(1 place)
Battery Retention Bracket.
See Detail A for alternate orientation.
DETAIL A
Alternate Orientation
of Retention Bracket
Connect Link Furnished
(string 2)
with Battery to these
Two Terminals
1/4-20 X 5/8" Bolt
1/4" Lock Washer
1/4" Flat Washer
(3 places)
1/4-20 x 5/8" Hex
Head Screw
(4 Places)
1/4-20 Lock Washer
(3 Places)
1/4-20 Flat Washer
(3 Places)
Connect POS (+)
Battery Cable
to this Terminal
(string 2)
If trays are equipped with
circuit breakers, TURN OFF ALL
circuit breakers before installing
and connecting any batteries!
17