Fujitsu ETERNUS DX S4 Series Configuration Manual page 3

This manual briefly explains the operations that need to be performed by the user in order to connect an
ETERNUS DX/AF to a server running Solaris OS, HP-UX, AIX, Windows
®
rix XenServer
This manual should be used in conjunction with any other applicable user manuals, such as those for the
ETERNUS DX/AF, server, OS, Fibre Channel cards, and drivers.
Refer to "Configuration Guide -Server Connection- Notations" for the notations used in this manual such as
product trademarks and product names. For storage systems that are supported by the OS, refer to the Server
Support Matrix of the ETERNUS DX/AF.
The Contents and Structure of this Manual
This manual is composed of the following two chapters.
"Chapter 1 Workflow" (page 6)
•
This chapter describes the workflow when setting up a storage system.
"Chapter 2 Setting Up the ETERNUS DX/AF" (page 8)
•
This chapter describes how to set up a storage system.
®
, Oracle Linux, or Oracle VM Server for x86 via a Fibre Channel interface.
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection-
Copyright 2017 FUJITSU LIMITED
®
, Linux, VMware ESX, PAN Manager, Cit-
3
Preface
15th Edition
December 2017
P3AM-7962-15ENZ0