INSTALLATION INSTRUCTIONS
Mirrors
fig 1
WWW.UTOPIAGROUP .COM
page 10
FITTING A MIRROR
Top
Decide which way you wish to hang the mirror, horizontal or vertical.
Insert the white plastic pegs into the carcass holes (see fig 1), ensuring they are pushed
in properly, and straight. (Please note that once the white plastic inserts are fitted into the
holes on the carcass backboard, they cannot be removed).
Drill holes into the wall at the appropriate positions, depending upon which way you are
hanging the mirror. Make sure they are level (using a spirit level).
If you are fitting this unit to a plasterboard wall, please ensure the correct fixings are used.
Hang the mirror onto the screws.