Quantum rdx8000 Quick Start Manual page 7

INSTALL RDX UTILITY SOFTWARE
RDX Utility software enables you to eject your removable cartridges safely.
To install RDX Utility:
• Using a Web browser, go to
www.quantum.com/ServiceandSupport/
• Find the listing for your operating system and right-click the icon
to download
• With the compressed file saved to your local directory, double-click
to launch
• Follow the on-screen prompts to place RDX Utility on your drive
iSCSI Connection
You need to configure the iSCSI Initiator on the host computer to
complete the iSCSI connection. Microsoft includes an iSCSI Initiator
with Windows Server 2008 and Windows 7; iSCSI Initiators for XP and
Windows Server 2003 are available from the Microsoft Download Center.
iSCSI Initiators for Macintosh and Linux operating systems are also available
online. Contact Quantum Technical Support for help.
Use the following procedure to set up the Windows iSCSI Initiator:
1. Open Microsoft iSCSI Initiator.
2. On the Discovery tab under Target Portals, click Add.
3. Type the current IP address of the RDX 8000 unit, then click OK.
The IQN for the RDX 8000 unit should appear on the Targets tab under
available targets.
4. Highlight the RDX 8000 IQN by clicking on it.
5. Depending on the version of MS Initiator in use, click "Log On" or
"Connect." The RDX 8000 IQN should now change to connected.
The RDX 8000 is now connected via iSCSI.
6