Completing The Setup - Toro TimeCutter SW series Setup Instructions

8

Completing the Setup

Parts needed for this procedure:
1 Ignition key
1 Hose coupling (not included with CE models)
1 Operator's Manual
1 Engine Owner's Manual (non-Toro engines)
1 KeyChoice ® key (blue)
Procedure
Checking the Tire Pressure
Check the front and rear tires for proper inflation;
refer to Checking the Tire Pressure in the Operator's
Manual for the recommended inflation pressure.
Checking the Side-Discharge Chute
Remove the packing restraint holding the side
discharge chute up and lower the chute into place.
Checking the Engine-Oil Level
Before you start the engine and use the machine,
check the oil level in the engine crankcase; refer to
Checking the Oil Level in the Operator's Manual.
Keep all the following items with the machine:
•
Ignition key
•
KeyChoice key (blue)
•
Hose coupling (not included in CE models)
•
Operator's Manual
•
Engine Owner's Manual (non-Toro engines)
7