Installing The Steering Wheel - Toro TimeCutter SW series Setup Instructions

2
Installing the Rear Hitch
Parts needed for this procedure:
1 Rear hitch
2 Bolt (5/16 x 1 inch)
2 Locknut (5/16 inch)
Procedure
1. Install the bracket to the frame as shown in
Figure 2.
2. Torque the bolts between 19.8 and 25.4 N∙m
(175 and 225 in-lb).
1. Bolt (2)
Figure 2
2. Locknut (2)
3
Installing the Steering
Wheel
Parts needed for this procedure:
1 Steering wheel
1 Top cover
1 Locknut
1 Rear cover
2 Screws
Procedure
1. Rotate the steering column up to the user
position (Figure
g028437
2. Position the steering wheel as shown in
3. Install the steering wheel and top cover to the
steering column with the locknut
4. Torque the locknut between 36.6 and 44.7 N∙m
(27 and 33 ft-lb).
5. Install the steering-wheel cover.
3
3).
Figure 3
(Figure
g027703
Figure 5.
4).