Drift Mode Display Screens; Resetting The Screens; Score Codes - Racelogic DriftBox Instruction Manual

Meter to measure drift angle

Table of Contents

Racelogic Ltd

Drift Mode Display Screens

DriftBox has three different screens, available in each mode, which are selected by using

▲▼

the

buttons.

In any of the Drift mode screens, the Peak, Average, Score and Speeds can be reset by

pressing the RESET button for 1.5 s

Scores are generated by DriftBox based on the performance of a drift, you can enter the

DriftBox league with your own scores, but you will need the validation code to verify your

score. You can enter this validation code onto the website under My DriftBox

score.

Viewing the Score Code

Validation codes are automatically saved to a file on the SD card called 'Scores'.txt', but

you can also press the OK button to display a score code on the screen of DriftBox.

This screen shows speed and drift-angle in real-time, as well

as the peak drift angle achieved.

Holding the reset button for 1.5s will reset the peak drift

angle.

Practice Mode Only

This screen shows the peak drift angle, the speed at which it

was achieved, the maximum lateral acceleration achieved,

and the score awarded by DriftBox for the run.

Sectors Mode Only

Shows the peak drift angle, the speed at which it was

achieved, the sector number, the score awarded by DriftBox

for the run, and the cumulative score in brackets.

SPIN! is displayed if the drift is greater than 100 degrees, or

the drift is greater than 45 degrees with the speed<10 kmh.

Page 15

Drift Mode

My high

Table of Contents