Table of Contents
Advertisement
4 Hang-Mount Installation
4.1 Installation Component and Dimension
The hang-mounted bracket is shown in Figure 4-1; refer to Figure 4-2 for bracket dimension.
Note
The adjustable range of bracket length is: default 200mm, optional 400mm; it only needs to
replace the connection pole.
4.2 Hang-mounted Bracket Installation Steps
4.2.1 Installation Conditions
The hang-mounted speed dome can be installed on hard wall structure in both indoor and
outdoor environments. The wall needs to meet the following installation conditions:
The wall shall be thick enough to install expansion bolts.
The wall shall sustain at least 8X weight of the camera and bracket etc.
Figure 4-1
Figure 4-2
15
Advertisement
Table of Contents
