Dahua Network Speed Dome Web 3.0 Operation Manual Table of Contents Network Connection ........................1 Preparation ........................1 Log in ..........................1 Live Interface ......................... 3 Encode Setup ........................ 3 Video Window Setup ....................4 System Menu ......................... 5 Video Window Function Option .................. 6 PTZ Control ........................
Page 3
Dahua Network Speed Dome Web 3.0 Operation Manual 2.2.3 Snapshot Type ..................... 20 Setup ............................21 Camera ......................... 21 3.1.1 Video ........................21 3.1.2 Audio ........................28 IVS Setup ........................29 3.2.1 Global Setup ......................29 3.2.2 Scene Setup ......................30 3.2.3 Rule Setup ......................
Page 4
Dahua Network Speed Dome Web 3.0 Operation Manual 3.5.3 Record control ...................... 69 System .......................... 70 3.6.1 General ........................70 3.6.2 Account ........................72 3.6.3 PTZ ......................... 76 3.6.4 Default ........................77 3.6.5 Import/Export ......................78 3.6.6 Auto maintenance ....................78 3.6.7 Upgrade .........................
Dahua Network Speed Dome Web 3.0 Operation Manual 1 Network Connection 1.1 Preparation This series speed dome product supports the Web access and management via PC. Web includes several modules: monitor channel preview, PTZ control, system configuration, alarm and etc.
Page 6
Dahua Network Speed Dome Web 3.0 Operation Manual Figure 1-2 If it is your first time to login in, system pops up warning information to ask you whether install control webrec.cab or not. Please click OK button, system can automatically install the control. When system is upgrading, it can overwrite the previous Web too.
Dahua Network Speed Dome Web 3.0 Operation Manual Figure 1-3 1.3 Live Interface After you logged in, you can see the live monitor window. Now you can operate the speed dome via the WEB. See Figure 1-4. Figure 1-4 There are six sections: ...
Dahua Network Speed Dome Web 3.0 Operation Manual Figure 1-5 Please refer to the following sheet for detailed information. Parameter Function In normal network width environment, main stream can record Main stream audio/video file and realize network monitor. Connected to the Protocol, monitor or close the video under sub Sub Stream 1 stream 1 configuration.
Dahua Network Speed Dome Web 3.0 Operation Manual Fluency There are three types: real-time/normal/fluency. setup Rules info Click it to enable live interface to display intelligent rules, default is enable. Open/close Left click it to display or hide the PTZ control interface.
Dahua Network Speed Dome Web 3.0 Operation Manual Please refer to chapter 1.3 Live, chapter 2 Playback, chapter 3 Setup, chapter 4Alarm, chapter 5 Log out for detailed information. Figure 1-8 1.7 Video Window Function Option The interface is shown as below. See Figure 1-9.
Dahua Network Speed Dome Web 3.0 Operation Manual Manual Click it and then left click the mouse and drag the mouse in Track the video window to select any zone, you can enable the speed dome to auto track the object in the specified area.
Dahua Network Speed Dome Web 3.0 Operation Manual 1.9 Joystick Figure 1-11 The function of joystick can be simulated by dragging the button in the middle, which can be used to control the device rotation. 1.10 PTZ Setup/Menu The PTZ setup/Menu interface is shown as in Figure 1-11.
Page 13
Dahua Network Speed Dome Web 3.0 Operation Manual Click PTZ set button, the interface is shown as in Figure 1-12.Here you can select scan, preset, tour pattern, assistant function and etc. Figure 1-12 Please refer to the following sheet for PTZ setup information.
Page 14
Dahua Network Speed Dome Web 3.0 Operation Manual Parameter Function It is the accurate positioning function. Please input Goto corresponding horizontal angle, tilt angle, and speed dome zoom speed and then click Goto button to go to a specified position.
Dahua Network Speed Dome Web 3.0 Operation Manual 2 Playback The playback of WEB client end supports two modes which are video playback and picture playback. Note: It needs to set “3.5 Storage Management” before operating playback. 2.1 Video Playback...
Dahua Network Speed Dome Web 3.0 Operation Manual 2.1.1 Play Function Figure 2-2 Parameter Note When it displays this button, it means stop playing or not playing video. Click it to ① Play switch to normal playing status. ② Stop Click it to stop playing current video.
Page 17
Dahua Network Speed Dome Web 3.0 Operation Manual Figure 2-3 Parameter Note Select “dav” to playback video. File type Select “jpg” to playback picture. Data source The default is SD card. Step 1 Click the blue date, the time line will display the record file progress bar with colors. Green represents general record;...
Page 18
Dahua Network Speed Dome Web 3.0 Operation Manual Double click the file in the list, and it will playback the file, meanwhile it will also display file size, begin time and end time. Figure 2-5 Parameter Note It is to search all the record file between begin time and end Search time of the selected date.
Dahua Network Speed Dome Web 3.0 Operation Manual Parameter Note When record type is “dav”, click download button to download the file to local. When record type is “mp4”, click download button to download file to 3.1.15. Storage path.
Dahua Network Speed Dome Web 3.0 Operation Manual 2.1.4 Record Type After checking record file type, it will only display the selected type of file in the progress bar and file list. Figure 2-7 2.1.5 Progress Bar Time Format Figure 2-8...
Dahua Network Speed Dome Web 3.0 Operation Manual 2.2 Picture Playback The picture playback interface of WEB client includes following three functions. Parameter Note Play function Playback file Snapshot type Figure 2-10 2.2.1 Play Function...
Dahua Network Speed Dome Web 3.0 Operation Manual Figure 2-11 The default icon is , which means stopping playing or not playing pictures. Click play button and switch to normal play state, at this moment, the icon displays as Click pause button and switch to pause play state.
Page 23
Dahua Network Speed Dome Web 3.0 Operation Manual Figure 2-13 Step 1 Click file list , the snapshot file of selected date will display in the list. Step 2 Double click the file in the list, it will playback the snapshot picture.
Dahua Network Speed Dome Web 3.0 Operation Manual 2.2.3 Snapshot Type After checking snapshot type, it will only display the selected type of file in the file list. Figure 2-14...
Dahua Network Speed Dome Web 3.0 Operation Manual 3 Setup 3.1 Camera 3.1.1 Video 3.1.1.1 Video bit stream The video bit stream interface is shown as below. See Figure 3-1. Figure 3-1 Please refer to the following sheet for detailed information.
Page 26
Dahua Network Speed Dome Web 3.0 Operation Manual Parameter Function Resolution There are multiple resolutions. You can select from the dropdown list. For each resolution, the recommended bit stream value is different. Frame Rate PAL: 1~25f/s,NTSC: 1~30f/s. (FPS) There are two options: VBR and CBR.
Page 27
Dahua Network Speed Dome Web 3.0 Operation Manual Parameter Function There are four options: H.264, H.264H, and MJPEG Encode mode encode mode. H.264 : Main Profile encode mode. H.264H: High Profile encode mode. MJPEG: In this encode mode, the video needs general large bit stream to guarantee the video definition.
Page 28
Dahua Network Speed Dome Web 3.0 Operation Manual Figure 3-2 Please refer to the following sheet for detailed information. Parameter Function There are two modes: general (schedule) and Event Snapshot type (activation). General (schedule) snapshot is to snap in the specified period.
Page 29
Dahua Network Speed Dome Web 3.0 Operation Manual Figure 3-4 Figure 3-5...
Page 30
Dahua Network Speed Dome Web 3.0 Operation Manual Figure 3-6 Parameter Note Check “Enable”, then it will display channel title in the video monitoring window; Channel check “Disable”, then it won’t display. Title You can use the mouse to drag the “Channel Title” box to adjust its position.
Page 31
Dahua Network Speed Dome Web 3.0 Operation Manual Figure 3-7 Parameter Note Check “Enable” to display ROI in the video monitoring window; check “Disable” not to Enable display. Image It can set the image quality of ROI, ranging from 1~6.
Dahua Network Speed Dome Web 3.0 Operation Manual Storage path is linked to snapshot, download and clip in the playback interface, which can set the storage path for playback snapshot, record download and playback clip respectively. Default Live Snapshot path:C:\Documents and ...
Dahua Network Speed Dome Web 3.0 Operation Manual Parameter Function Audio enable Main stream: Recorded file only contains video by default. You need to check the audio box here to enable audio function so that the main stream the network transmitted is audio/video composite stream.
Dahua Network Speed Dome Web 3.0 Operation Manual Parameter Function Click it to enable panorama PTZ. Panorama PTZ Note: enable IVS function and panorama PTZ can’t be enabled at the same time. It includes: panorama, single scene and multiple-scene. ...
Page 35
Dahua Network Speed Dome Web 3.0 Operation Manual Parameter Function Add scene Click it to add a scene. Scene setup Click it to set current monitor video as the corresponding scene and get a number. Preview scene Click it to preview the selected scene.
Dahua Network Speed Dome Web 3.0 Operation Manual Figure 3-9 In Figure 3-9, click Add scene button you can set tour point during the scene tour process. Move the mouse to the Scene name list; you can select several scenes as a tour. Move the mouse to the Stay time, you can set stay time period.
Page 37
Dahua Network Speed Dome Web 3.0 Operation Manual Please refer to the following sheet for detailed informaiton. Parameter Function You can select the scene from the dropdown list so that you can add the Select scene. corresponding rule. Add rule Click it to add a rule to the selected scene.
Page 38
Dahua Network Speed Dome Web 3.0 Operation Manual Parameter Function Direction It is to set tripwire direction. The option includes: A->B、B->A、A<->B. ,you can Check the box here to enable this function and then click button Target filter ,you set the target filter model in this scene for this rule. Click the button can remove selected target filter model.
Page 39
Dahua Network Speed Dome Web 3.0 Operation Manual Parameter Function It is for the In area option in the Detect action list item. It is to set the alarm Max target No. activation amount in the zone. System will not generate an alarm when the object amount in the zone is more than the threshold you set here.
Page 40
Dahua Network Speed Dome Web 3.0 Operation Manual Parameter Function Object type You can select an object type here. The default setup is all types. supported It is to set the min time between the abandoned object occurrence and alarm Min last time activation.
Page 41
Dahua Network Speed Dome Web 3.0 Operation Manual Parameter Function Here is to set the min time between the target in the zone and an alarm activation Min last time occurrence. Report interval It is to set alarm period. System just alarms once if the value is 0 here.
Page 42
Dahua Network Speed Dome Web 3.0 Operation Manual Parameter Function It is to set the min time between the object continuous movement and alarm Min last time activation. Activation It is to set the min speed here when an object can activate an alarm.
Page 43
Dahua Network Speed Dome Web 3.0 Operation Manual Parameter Function ,you can Check the box here to enable this function and then click button Target filter ,you can remove set the target filter model in this scene. Click the button selected target filter model.
Page 44
Dahua Network Speed Dome Web 3.0 Operation Manual Figure 3-18 Please refer to the following sheet for detailed informaiton. Parameter Function Object type You can select an object type here. The default setup is all types. supported It is to set the min time between the illegal parking occurrence and alarm Min last time activation.
Dahua Network Speed Dome Web 3.0 Operation Manual Figure 3-19 Please refer to the following sheet for detailed informaiton. Parameter Function Here you can set rule arm and disarm period. Please click the Setup button to Rule Working period set.
Page 46
Dahua Network Speed Dome Web 3.0 Operation Manual Figure 3-20 Please refer to the following sheet for detailed informaiton. Parameter Function Scene Please select a scene from the dropdown list you want to set. There are three modes: compromise mode, omission detect less and error detect Detect balance less.
Dahua Network Speed Dome Web 3.0 Operation Manual 3.3 Network 3.3.1 TCP/IP The TCP/IP interface is shown as in Figure 3-21. Figure 3-21 Please refer to the following sheet for detailed information. Parameter Function Host Name It is to set current host device name.
Page 48
Dahua Network Speed Dome Web 3.0 Operation Manual IP Version It is to select IP version. IPV4 or IPV6. You can access the IP address of these two versions. Please note system needs to check the validity of all IPv6 addresses.
Dahua Network Speed Dome Web 3.0 Operation Manual 3.3.2 Connection The connection interface is shown as in Figure 3-22. Figure 3-22 Please refer to the following sheet for detailed information. Parameter Function It is the max Web connection for the same device. The value ranges from 1 connection to 20.
Dahua Network Speed Dome Web 3.0 Operation Manual RTSP port Usually, the default value is 554. You do not need to input again if you are using the default value. When you are using QuickTime (Apple browser) or VLC play real-time video, you can use the following format to play.
Dahua Network Speed Dome Web 3.0 Operation Manual Figure 3-23 3.3.4 PPPoE The PPPoE interface is shown as in Figure 3-23. Input the PPPoE user name and password you get from the IPS (internet service provider) and enable PPPoE function. Please save current setup and then reboot the device to get the setup activated.
Dahua Network Speed Dome Web 3.0 Operation Manual Figure 3-23 3.3.5 DDNS The DDNS interface is shown as in Figure 3-24. The DDNS is to set to connect the various servers so that you can access the system via the server.
Dahua Network Speed Dome Web 3.0 Operation Manual Please refer to the following sheet for detailed information. Parameter Function Server Type You can select DDNS protocol from the dropdown list and then enable DDNS function. Server IP DDNS server IP address Server Port DDNS server port.
Page 54
Dahua Network Speed Dome Web 3.0 Operation Manual The SMTP interface is shown as in Figure 3-26. Figure 3-26 Please refer to the following sheet for detailed information. Parameter Function Input server address and then enable this function. SMTP Server Port Default value is 25.
Dahua Network Speed Dome Web 3.0 Operation Manual Parameter Function Input receiver email address here. Max three addresses. Mail receiver The send interval ranges from 0 to 3600 seconds. 0 means Interval there is no interval. Please note system will not send out the email immediately when the alarm occurs.
Dahua Network Speed Dome Web 3.0 Operation Manual Figure 3-27 3.3.9 SNMP The SNMP interface is shown as in Figure 3-28. The SNMP allows the communication between the network management work station software and the proxy of the managed device. Please install the software such as MG MibBrowser 8.0c software or establish the SNMP service before you use this function.
Dahua Network Speed Dome Web 3.0 Operation Manual Figure 3-28 Please refer to the following sheet for detailed information. Parameter Function SNMP Port The listening port of the proxy program of the device. It is a UDP port not a TCP port. The value ranges from 1 to 65535.
Dahua Network Speed Dome Web 3.0 Operation Manual You can view the server name when the speed dome is detected by the Bonjour. Please note the safari browse support this function. Click the “Display All Bookmarks: and open the Bonjour, system can auto detect the speed dome of the Bonjour function in the LAN.
Dahua Network Speed Dome Web 3.0 Operation Manual Figure 3-30 3.3.12 IEEE802 IEEE802.1X works standing for local and metropolitan area networks and port based network access control protocol. It supports manual operation of the client to choose means of authenticating by which to control it to access to the Local Area Networks or not.
Dahua Network Speed Dome Web 3.0 Operation Manual Figure 3-31 Please refer to the following sheet for detailed information. Parameter Function Authentication PEAP (protected EAP protocol). Username It needs the username to login, which is authenticated by the server. Password Please input password here.
Dahua Network Speed Dome Web 3.0 Operation Manual Parameter Function Real-time The data packet of the network video monitor. monitor Command The non-monitor packet such as device setup and search. 3.4 Event 3.4.1 Video detect 3.4.1.1 Motion Detect The motion detect interface is shown as in Figure 3-33.
Page 62
Dahua Network Speed Dome Web 3.0 Operation Manual Figure 3-34 Figure 3-35 Please refer to the following sheet for detailed information. Parameter Function Enable You need to check the box to enable motion detection function. There are six levels. The sixth level has the highest sensitivity.
Page 63
Dahua Network Speed Dome Web 3.0 Operation Manual Parameter Function Region There are six levels. The sixth level has the highest sensitivity. Region: If you select motion detection type, you can click this button to set motion detection zone. The light blue zones are the valid motion detect area.
Page 64
Dahua Network Speed Dome Web 3.0 Operation Manual Figure 3-36 Different colors represent different areas; each area can set different detection area, which can be irregular and discontinuous. If the monitoring range of the device is very large, it can divide the big range into several areas to enhance the result of motion detect.
Page 65
Dahua Network Speed Dome Web 3.0 Operation Manual The video masking interface is shown as in Figure 3-36. Figure 3-36 Please refer to the following sheet for detailed information. Parameter Function Enable You need to check the box to enable video masking function.
Dahua Network Speed Dome Web 3.0 Operation Manual Parameter Function Record System auto activates motion detection channel to record once channel video masking alarm occurs (working with motion detection function). Please note you need to go to Storage-> Schedule to set motion detect record period and go to Storage->Record...
Dahua Network Speed Dome Web 3.0 Operation Manual Parameter Note Check “Enable Input Abnormal”, it will trigger alarm when it detects audio input Enable Input Abnormal abnormal. Check “Enable Intensity Change”, it will trigger alarm when it detects the audio...
Page 68
Dahua Network Speed Dome Web 3.0 Operation Manual The alarm activation interface is shown as in Figure 3-37. Figure 3-37 Please refer to the following sheet for detailed information. Parameter Function Enable You need to check the box to enable this function.
Dahua Network Speed Dome Web 3.0 Operation Manual Parameter Function Record System auto activates motion detection channel to record once Channel alarm occurs (working with motion detection function). Please note you need to go to Storage-> Schedule to set current channel as general record.
Page 70
Dahua Network Speed Dome Web 3.0 Operation Manual Figure 3-39 Figure 3-40 Parameter Note SD card abnormity alarm event includes: no SD card, capacity warning, SD card Event Type error. Enable Check it to enable SD card abnormity alarm. Check it to enable alarm activation output interface, it can activate Relay out corresponding alarm output device when alarm occurs.
Dahua Network Speed Dome Web 3.0 Operation Manual Parameter Note SD Card It can set the remaining capacity of SD card; alarm will occur when the remaining capacity of SD card is less than the percentage. Capacity Limit When device is offline or IP conflicts, the abnormal alarm is similar with case of SD card error.
Dahua Network Speed Dome Web 3.0 Operation Manual You can view the current time period setup from the color bar. Green color stands for the general record/snapshot. Yellow color stands for the motion detect record/snapshot. Red color stands for the alarm record/snapshot.
Dahua Network Speed Dome Web 3.0 Operation Manual Parameter Function Event It includes: general, motion detect and alarm. Type Local It is to save in the SD card. It is to save in the FTP server. The local interface is shown as in Figure 3-43. Here you can view local SD card information. You can also operate the read-only, write-only, hot swap and format operation.
Dahua Network Speed Dome Web 3.0 Operation Manual The record control interface is shown as in Figure 3-45. Figure 3-45 Please refer to the following sheet for detailed information. Parameter Function Here you can select file size. Default setup is 60 minutes.
Page 75
Dahua Network Speed Dome Web 3.0 Operation Manual Figure 3-46 Please refer to the following sheet for detailed information. Parameter Function It is to set device name. Device Name Video This is to display video standard. Standard Language You can select the language from the dropdown list.
Dahua Network Speed Dome Web 3.0 Operation Manual Figure 3-47 Please refer to the following sheet for detailed information. Parameter Function Here you can select date format from the dropdown list. Date format There are two options: 24-H and 12-H.
Page 77
Dahua Network Speed Dome Web 3.0 Operation Manual Figure 3-48 Add user: It is to add a name to group and set the user rights. See Figure 3-49. Here you can input the user name and password and then select one group for current user.
Page 78
Dahua Network Speed Dome Web 3.0 Operation Manual Figure 3-49 Modify user It is to modify the user property, belonging group, password and rights. See Figure 3-50. Modify password It is to modify the user password. You need to input the old password and then input the new password twice to confirm the new setup.
Page 79
Dahua Network Speed Dome Web 3.0 Operation Manual Figure 3-51 Add group: It is to add group and set its corresponding rights. See Figure 3-52. Please input the group name and then check the box to select the corresponding rights. It includes: live playback, record control, backup, PTZ control, user management and etc.
Dahua Network Speed Dome Web 3.0 Operation Manual Here you can modify group information such as remarks and rights. Figure 3-53 3.6.3 PTZ 3.6.3.1 Network PTZ The network PTZ interface is shown as in Figure 3-54. Figure 3-54 Please refer to the following sheet for detailed information.
Dahua Network Speed Dome Web 3.0 Operation Manual 3.6.3.2 Analog PTZ Figure 3-57 Parameter Note Address It is set as the address of the corresponding Speed Dome, it is 1 by default. Baud rate It is to select the Baud rate for camera, default is 9600...
Dahua Network Speed Dome Web 3.0 Operation Manual Figure 3-55 3.6.5 Import/Export The interface is shown as in Figure 3-56. Figure 3-56 Please refer to the following sheet for detailed information. Parameter Function It is to import the local setup files to the system.
Dahua Network Speed Dome Web 3.0 Operation Manual Here you can select auto reboot and auto delete old files interval from the dropdown list. If you want to use the auto delete old files function, you need to set the file period.
Dahua Network Speed Dome Web 3.0 Operation Manual 3.7 Information 3.7.1 Version The version interface is shown as in Figure 3-59. Here you can view system software version, WEB version, release date and etc. Please note the following information is for reference only.
Dahua Network Speed Dome Web 3.0 Operation Manual Please refer to the following sheet for log parameter information. Parameter Function Log types include: system operation, configuration operation, data Type operation, alarm event, record operation, and user management, log clear. Set the start time of the requested log.
Dahua Network Speed Dome Web 3.0 Operation Manual 4 Alarm Click alarm function, you can see an interface is shown as in Figure 4-1. Here you can set device alarm type and alarm sound setup. When the specified alarm occurred (you have subscribed), system can record the corresponding alarm information on the right pane of the alarm list.
Dahua Network Speed Dome Web 3.0 Operation Manual 5 Log out Click log out button, system goes back to log in interface. See Figure 5-1. You need to input user name and password to login again. Figure 5-1 Note: ...