Schedules - Digital Monitoring Products XR150 User Manual

Schedules

Schedules allow you to set recurring times when your system arms or
disarms. You can also set schedules for when you want your Z-Wave
devices to turn on and off.
Begin Here
1. Access the User Menu.
2. Press CMD until SCHEDULES? displays. Press any select key
or area.
3. At ALL TEMP, select ALL to add, change, or delete a
schedule. Select TEMP to add a temporary schedule. The
keypad displays TIMES AREAS DOORS. Press CMD to display
OUTPUT HOLIDAYS. Press CMD to display FAVORITES.
Add a Schedule
1. Select TIMES. The keypad displays ADD DEL CHG.
2. Select ADD.
3. Enter the new SCHEDULE NUMBER (1-99) and press CMD.
4. Press a top row select key or area and enter a SCHEDULE
NAME. Press CMD.
5. Select the day you want to add a schedule to. Press CMD to
display THU FRI SAT HOL.
6. At ENTER BEGIN TIME -:, enter the opening time and select
AM or PM. Enter all times using a 12-hour clock.
7. At ENTER END TIME -:, enter the end time and select AM or
PM.
System User Guide | XR150/XR550 Canadian
Delete a Schedule
1. Select TIMES, then select DELETE.
2. Enter the schedule number (1-99) and press CMD.
3. At DELETE SCHEDULE SURE? YES NO, select YES.
Change a Schedule
1. Select TIMES, then select CHG.
2. Enter the SCHEDULE NUMBER that's changing and press
CMD.
3. The keypad displays ENTER SCHEDULE and the schedule
name. Press any select key or area to change the schedule
name and press CMD.
4. Select the day you want the schedule to begin. Press CMD to
display to display THU FRI SAT HOL.
5. At ENTER BEGIN TIME -:, enter the opening time and select
AM or PM. Enter all times using a 12-hour clock.
6. At ENTER END TIME -:, enter the end time and select AM or
PM.
Add Area, Door, and Output Schedules
1. Select either AREAS, DOOR, or OUTPUT.
2. At ENTER area/door/output NUMBER:-, enter the number you
want to assign that schedule and press CMD.
3. At SCHEDULE NO:-, press any select key or area and enter
the number. Press CMD.
19