ZONE MONITOR
Zone Monitor and Chime provide the same
function. Use this function to allow the
system to monitor selected disarmed zones
(doors, windows, or motion detectors).
1.
Access the user menu and press
CMD until ZONE MONITOR?
displays.
2. Press any select key or area. The
keypad displays PERIM ALL NBR.
Select one of the following:
PERIM: Place all perimeter zones
•
into Zone Monitor.
•
ALL: Place all zones into Zone
Monitor.
•
NBR: Enter a specific zone number
for Zone Monitor.
SYSTEM TEST
Test the battery, alarm system, and
communication with the central station.
22
USER CODES
Add, edit, and delete user codes on your
system. You will be required to enter your
user code to access this feature.
SCHEDULES
Add, edit, and delete schedules. You can also
assign schedules to outputs, favorites, and
auto-arming and auto-disarming features.
TIME
Set the time and date shown on your keypad.
DISPLAY EVENTS
View up to 100 past events that occurred on
your system over the last 45 days.
REQUEST SERVICE
Use this function to send a message to your
security provider requesting service on your
system.
XTLplus System User Guide
|
Digital Monitoring Products, Inc.