QUBINO Flush 2 relay User Manual page 51

Parameter no. 120 – Temperature Sensor Reporting Threshold
If an external digital temperature sensor (sold separately) is connected to the device, it reports
temperature readings based on the threshold defined in this parameter. This parameter only
applies to the Celsius temperature unit (the Fahrenheit unit is currently not supported).
Values (size is 1 byte dec):
• Default value 5 = 0.5 °C
• 0 – Reporting disabled
1 - 127 = Where 1 stands for 0.1°C and 127 stands for 12.7 °C
51
EN.