Configuration Parameters - QUBINO Flush 2 relay User Manual

13. Configuration Parameters

Parameter no. 1 – In-wall Switch Type for Load 1 (Q1)
With this parameter, you can select between push-button (momentary) and on/off toggle
switch types.
Values (size is 1 byte dec):
• default value 1
• 0 - push-button (momentary)
• 1 - on/off toggle switch
Parameter no. 2 – In-wall Switch Type for Load 2 (Q2)
With this parameter, you can select between push-button (momentary) and on/off toggle
switch types.
Values (size is 1 byte dec):
• default value 1
• 0 - push-button (momentary)
• 1 - on/off toggle switch
43
EN.