Select
•
Yes, now and every time I connect a device
previous page) if you want the computer to automatically connect to Windows
Update to search the web every time the switcher is connected to this USB port.
Select
•
No, not this time
Windows Update to search the web at this time (for example, if the driver is already
on your computer).
3.
Click
(
). On the next screen, select the
Next
4
automatically (Recommended)
(you do not need to insert a disc).
1
Figure 7.
Selecting the Radio Button to Install the USB Driver Automatically
Your computer locates the driver needed for it to communicate with the SW HD 4K via
the USB port and loads it to the computer hard drive.
4.
When the Completed screen appears, click
NOTE: This wizard appears only the first time you connect the SW HD 4K to each
USB port. You do not see the wizard again unless you connect the switcher to a
different USB port on your computer.
5.
Configure the switcher as desired using SIS commands (see the
Communication and
commands).
(
) if you do not want the computer to connect to
3
Install the software
radio button (see figure 7,
2
Finish
Control, beginning on page 20, for information on available
SW HD 4K Series • Installation
(see figure 6,
, on the
2
), then click
1
Next
to close the wizard.
Remote
(
)
2
11