Comand System Settings - Mercedes-Benz S 350 Owner's Manual

Operating systems

COMAND system settings

COMAND system settings
Systems setting menu overview
Display Time
Display Time settings
settings
Display settings
Switching the display on or off
To switch off: select "Vehicle"
play off".
To switch back on: turn ymz, slide
qmr, slide or press n.
omp
Setting daylight/night display
Select "Vehicle" "System settings"
"Display".
Select "Day design" or "Night design"
or "Automatic".
i
In the "Automatic" setting, COMAND analy-
ses the automatic vehicle light sensor and
switches between the display designs automati-
cally.
200
Text reader Linguatronic* Language
Text reader Linguatronic*
settings settings
Time settings
Setting the time
i
"Dis-
The correct time must be set for the follow-
ing navigation system* functions to operate cor-
rectly:
Route guidance on routes with time-depend-
ent traffic guidance
Calculation of expected time of arrival
Select "Vehicle"
"Time"
To select hour or minute(s): slide
omp.
Favourites
Language Assign pro-
settings grammable
button
"System settings"
"Time".
Services* Reset
Bluetooth* set- Reset
tings COMAND to
factory settings
To set the value: turn
ymz
qmr.
To store the setting: press n.
i
The increment value for setting the minutes
depends on the situation. It is 30 minutes if your
vehicle is equipped with a navigation system*
and GPS reception is available. It is one minute if
there is no GPS signal or if your vehicle is not
equipped with a navigation system*.
or slide