Mercedes-Benz S 350 Owner's Manual page 223

Setting the time zone and switching be-
tween summer and standard time
i
The correct time zone and summer/ stand-
ard time must be set for the following navigation
system* functions to operate correctly:
Route guidance on routes with time-depend-
ent traffic guidance
Calculation of expected time of arrival
To set the time zone: select "Vehicle"
"System settings" "Time"
"Time zone".
The country list appears. The R dot in
front of a list entry indicates the cur-
rent setting.
Select the country in which you are cur-
rently driving.
A time zone list may also be displayed,
depending on the country selected.
Select the desired time zone.
Subsequent operation depends on:
whether your vehicle is equipped with a
navigation system*
whether your navigation system* has
GPS reception
which country you have previously set
You may either:
switch between "Summer time" and
"Standard Time" manually in a list
or
switch automatic summer to standard
time changeover (and vice versa) on or
off
i
The automatic changeover function is not
available in vehicles without a navigation system.
To switch manually: select "Summer
time" or "Standard Time".
The R dot in front of a list entry indi-
cates the current setting.
Operating systems
COMAND system settings
To switch automatic changeover on
or off: select "Automatic summer/
winter time changeover".
You have switched the function on or
off. A tick appears when the function is
switched on.
To store the setting and exit the
menu: slide omp.
i
If you have switched off the automatic
changeover function, you must change summer
to standard time and vice versa yourself.
Setting the date
Select "Vehicle" "System settings"
"Time" "Date".
To select the month or year: slide
omp.
To set the value: turn
ymz
qmr.
To store the setting: press n.
or slide
201