Resetting Neck-Pro Comfort Head Restraints - Mercedes-Benz S 350 Owner's Manual

Resetting NECK-PRO comfort head
restraints*
If the NECK-PRO comfort head restraints
have been triggered in an accident, you
must reset the head restraints on the driv-
er's and front-passenger seats. If this is
not done, the additional protection these
head restraints provide will not be availa-
ble in the event of another rear collision.
You can tell that the NECKPRO comfort
head restraints have been triggered be-
cause they will then be tilted forwards.
P91.16-2327-31
1 Reset tool
Take reset tool 1 from the vehicle tool
kit in the boot.
Insert reset tool 1 into the bore hole
at the top of the NECK-PRO comfort
head restraint and between the head
restraint upholstery and the rear trim.
Press reset tool 1 down until you hear
the head restraint deployment mecha-
nism engage.
Remove reset tool 1 from the bore
hole.
Press the upholstery of the NECK-PRO
comfort head restraint back with force
until the head restraint engages.
Repeat the procedure for the second
NECK-PRO comfort head restraint.
i
If you have problems when resetting the
NECK-PRO comfort head restraints, have this
work carried out at a qualified specialist work-
shop, e.g. a Mercedes-Benz Service Centre.
For safety reasons, have the NECK-PRO comfort
head restraints checked at a qualified specialist
workshop, e.g. a Mercedes-Benz Service Centre,
following a rear collision.

Resetting NECK-PRO comfort head restraints*

Practical advice
519