Memory Function - Mercedes-Benz S 350 Owner's Manual

Controls

Memory function*

Memory function*
You can store up to three different settings
using the memory button.
The following settings are stored as a sin-
gle memory preset for the driver's seat:
Seat position and lumbar support ad-
justment
Dynamic driving seat*: activated/
deactivated
Multi-contour seat*: last setting made
Steering wheel position
Exterior mirror position on the driver's
and front-passenger side
G
Risk of accident
Only activate the memory function on the
driver's side when the vehicle is stationary.
You could otherwise be distracted by a
spontaneous movement of the steering
wheel or seat.
The memory button and the storage posi-
tion buttons are located on the door con-
trol panel.
272
P54.25-4724-31
M Memory button
1, 2, 3 Storage position buttons
Make sure that the key is in position 1
or 2 in the ignition lock or a door is
open.
To store: adjust the seat ( page 259).
On the driver's side, also adjust the
steering wheel ( page 268) and the
mirrors ( page 269).
Press the M memory button.
Press one of storage position switches
1, 2 or 3 within three seconds.
The settings are stored in this storage
position.
Calling up a stored setting
Press and hold relevant storage posi-
tion switch 1, 2 or 3 until the seat,
steering wheel and mirrors have moved
to the stored position.
i
The seat, steering wheel and mirror setting
procedure is interrupted as soon as you release
the storage position switch. The multi-contour
seat* setting or the lumbar support adjustment
are still carried out.