Table of Contents
Advertisement
Event Output: Designates the output to show event video. If available, you can select a
different video output interface from the Video Output Interface when an event occurs.
Full Screen Monitoring Dwell Time: Sets the time in seconds to show alarm event screen.
Step 2 Set the camera order.
1) Click View tab and select the Video Output Interface from the drop-down list.
2) Click a window to select it, and then double-click a camera name in the camera list you
would like to display. Setting an 'X' means the window will not display any camera.
3) You can also click
view of all channels. Click
4) Click the Apply button.
For 1.5U/2U 5MP non-real time series DVR, if the sum of the analog and IP channels exceeds 25, up
to 32-window division mode is supported for the VGA/HDMI1 output.
3.5 Manual Video Quality Diagnostics
Purpose
The video quality of the analog channels can be diagnosed manually and you can view the
diagnostic results from a list.
Step 1 Go to Menu> Manual >Manual Video Quality Diagnostics.
Digital Video Recorder User Manual
Figure 3-11 Live View-Camera Order
to start live view of all channels in order and click
or
to go to the previous or next page.
Figure 3-12 Video Quality Diagnostics
74
to stop live
Advertisement
Table of Contents
