Usb Mouse Operation - RainVision UDVR Series User Manual

If the Status indicator on the front panel turns blue, the remote control is operating properly. If
the Status indicator does not turn blue and there is still no response from the remote, please
check the following:
Step 1 Batteries are installed correctly and the polarities of the batteries are not reversed.
Step 2 Batteries are fresh and not out of charge.
Step 3 IR receiver is not obstructed.
If the remote still cannot function properly, please change the remote and try again, or contact the
device provider.

1.3 USB Mouse Operation

A regular 3-button (Left/Right/Scroll-wheel) USB mouse can also be used with this DVR. To use a
USB mouse:
Step 1 Plug USB mouse into one of the USB interfaces on the front panel of the DVR.
Step 2 The mouse should automatically be detected. If in a rare case that the mouse is not detected,
the possible reason may be that the two devices are not compatible, please refer to the
recommended the device list from your provider.
The operation of the mouse:
Name
Left-Click
Right-Click
Digital Video Recorder User Manual
Table 1-7 Description of the Mouse Control
Action Description
Live view: Select channel and show the quick set
menu.
Single-Click
Menu: Select and enter.
Live view: Switch between single-screen and
Double-Click
multi-screen.
PTZ control: Wheeling.
Privacy mask and motion detection: Select target
area.
Drag
Digital zoom-in: Drag and select target area.
Live view: Drag channel/time bar.
Live view: Show menu.
Single-Click
Menu: Exit current menu to upper level menu.
36