Adjusting Live View Settings - RainVision UDVR Series User Manual

Step 2 Check the checkbox after Enable Channel-Zero Encoding.
Step 3 Configure the Frame Rate, Max. Bitrate Mode and Max. Bitrate.
Step 4 Click the Apply button to activate the settings.
Step 5 After you set the Channel-Zero encoding, you can get a view in the remote client or web
browser of 16 channels in one screen.

3.4 Adjusting Live View Settings

Purpose
Live View settings can be customized according to different needs. You can configure the output
interface, dwell time for screen to be shown, mute or turning on the audio, the screen number for
each channel, etc.
Step 1 Go to Menu > Configuration > Live View > General.
The settings available in this menu include:

Video Output Interface: Selects the output to configure the settings.
For 1.5U/2U 5MP non-real time series DVR, you can select VGA/HDMI1, HDMI2, Main CVBS
for video output interface.
For other models, you can select Main CVBS and HDMI/VGA for video output interface.

Live View Mode: Selects the display mode to be used for Live View.

Dwell Time: The time in seconds to dwell between switching of channels when enabling
auto-switch in Live View.

Enable Audio Output: Enables/disables audio output for the selected camera in the live view
mode.

Volume: Adjusts the volume of the audio output.
Digital Video Recorder User Manual
Figure 3-9 Live View- Channel-Zero Encoding
Figure 3-10 Live View-General
73