Table of Contents
Advertisement
2) Select the camera (s) to be configured with the same OSD settings. You can also check the
checkbox of Analog to select all cameras.
3) Click the OK button to finish the Copy settings and back to the OSD Configuration
interface.
Step 8 Click the Apply button to apply the settings.
15.2 Configuring Privacy Mask
Purpose
You are allowed to configure the four-sided privacy mask zones that cannot be viewed or recorded
by the operator.
Step 1 Go to Menu > Camera > Privacy Mask.
Step 2 Select the camera to set privacy mask.
Step 3 Check the checkbox of Enable Privacy Mask to enable this feature.
Digital Video Recorder User Manual
Figure 15-2 Copy Settings to Other Cameras
Figure 15-3 Privacy Mask Settings Interface
221
Advertisement
Table of Contents
