Switching Main/Aux Output - RainVision UDVR Series User Manual

3.2.2 Switching Main/Aux Output

 Refer to Chapter 3.2 Operations in Live View Mode for the main and aux output
relationship.
 The CVBS output only serves as the aux output or live view output.
Step 1 Use the mouse wheel to double-click on the HDMI1/VGA, or HDMI2, or HDMI/VGA output
screen, and the following message box pops up.
Step 2 Use the mouse wheel to double-click on the screen again to switch to the aux output, or
click Cancel to cancel the operation.
Step 3 Select the Menu Output Mode to others from the right-click menu on the monitor.
Step 4 On the pop-up message box, click Yes to reboot the device to enable the selected menu
output as the main output.
You can select the Menu Output Mode under Menu>Configuration>General>More Settings to
Auto, HDMI1/VGA and HDMI2 (for 1.5U/2U 5MP non-real time) or Auto and HDMI/VGA (for other
models) and then reboot the device to switch the main output.
Digital Video Recorder User Manual
Figure 3-1 Right-click Menu
Figure 3-2 Switch Main and Aux Output
69