Table of Contents
Advertisement
Step 5 Click OK to save the settings and exit the interface.
2.8 Configuring Signal Input Channel
This chapter is only applicable to 1.5U/2U 5MP non-real time series DVR.
Purpose
You can configure the analog and IP signal input types and enable 5 MP long distance transmission.
Step 1 Go to Menu > Camera > Signal Input Status.
Step 2 Check the checkbox to select different signal input types: HD/CVBS and IP. If you select
HD/CVBS, four types of analog signal inputs including TVI HD, AHD, HDCVI, and CVBS can be
connected randomly for the selected channel. If you select IP, IP camera can be connected
for the selected channel.
Step 3 Click Apply to save the settings.
You can view the max. accessible number of IP cameras in the Max. IP Camera Number text field.
For 1.5U/2U 5MP non-real time series DVR, disabling one analog channel will add one IP channel.
For 1.5U 5MP non-real time series DVR, the accessible IP channels are X+2 (X refers to the disabled
Digital Video Recorder User Manual
Figure 2-44 Password Configuration of the Camera
Figure 2-45 Signal Input Status
63
Advertisement
Table of Contents
