Table of Contents
Advertisement
4) Click OK to save the rule settings and back to the line crossing detection settings interface.
Step 7 Click
and draw a quadrilateral in the preview window by specifying four vertexes of
the detection region, and right click to complete drawing. Only one region can be
configured.
You can use the
Up to 4 rules can be configured.
Step 8 Click Apply to save the settings.
The sudden scene change detection and the intrusion detection cannot be enabled at the same
channel.
10.5 Region Entrance Detection
Purpose
Digital Video Recorder User Manual
Figure 10-8 Set Intrusion Crossing Detection Rules
to clear the existing virtual line and re-draw it.
Figure 10-9 Draw Area for Intrusion Detection
165
Advertisement
Table of Contents
