Step 2 Configure RS-232 parameters, including baud rate, data bit, stop bit, parity, flow control
and usage.
Step 3 Click the Apply button to save the settings.
17.3 Configuring DST Settings
Step 1 Go to Menu > Configuration > General > DST Settings.
Step 2 Check the checkbox before the Auto DST Adjustment item.
Or you can manually check the Enable DST checkbox, and then you choose the date of the
DST period.
17.4 Configuring More Settings
Step 1 Go to Menu > Configuration > General > More Settings.
Step 2 Configure the following settings:
Device Name: Edit the name of DVR.
Device No.: Edit the serial number of DVR. The Device No. can be set in the range of 1 to
255, and the default No. is 255.
Digital Video Recorder User Manual
Figure 17-3 RS-232 Settings Interface
Figure 17-4 DST Settings Interface
Figure 17-5 More Settings Interface
234