Table of Contents
Advertisement
analog channel(s) of the DVR.). For 8ch 2U 5MP non-real time models, the accessible IP channels
are X+10 (X refers to the disabled analog channel(s) of the DVR.). For 16ch 2U 5MP non-real time
models, the accessible IP channels are X+18 (X refers to the disabled analog channel(s) of the DVR.)
and the max. IP channels are 32.
2.9 Configuring 5 MP Long Distance Transmission
This chapter is only applicable to 5MP non-real time series DVR.
Purpose
For 5MP non-real time series DVR, you can configure 5 MP long distance transmission on the Signal
Input Status interface.
Step 1 Go to Menu > Camera > Signal Input Status.
Step 2 Click
to enter the 5 MP Long Distance Transmission Settings interface.
Step 3 Check the checkbox to enable 5 MP Long Distance Transmission of the selected channel.
Digital Video Recorder User Manual
Figure 2-46 Signal Input Status
Figure 2-47 Signal Input Status
Figure 2-48 5 MP Long Distance Transmission Settings
64
Advertisement
Table of Contents
