Step 3 Click Yes to enable the function and reboot the device to have new settings taken effect.
5.12 Configuring 1080P Lite
Purpose
When the 1080P Lite Mode is enabled, the encoding resolution at 1080P Lite (real-time) is
supported. If not, up to 1080P (non-real-time) is supported.
This chapter is appplicable to 3MP non-real time series DVR.
Task 1: Enabling the 1080P Lite Mode
Step 1 Go to Menu > Record > Advanced.
Step 2 Check the checkbox of 1080P Lite Mode and click Apply to pop up the attention box. After
enabling 1080p lite mode, the 3 MP signal is not accessible to analog channel.
Step 3 Click Yes to reboot the device to have new settings taken effect.
Task 2: Disabling the 1080P Lite Mode
Step 1 Go to Menu > Record > Advanced.
Step 2 Uncheck the checkbox of 1080P Lite Mode and click Apply. The following attention box
pops up.
Digital Video Recorder User Manual
Figure 5-39 Attention Box
Figure 5-40 Advanced Interface
Figure 5-41 Attention
109