Table of Contents
Advertisement
Step 5 Click the Clone button and a message box pops up.
Step 6 Click the Yes button to continue.
You can check the clone progress in the HDD status.
14.7 Checking HDD Status
Purpose
You may check the status of the installed HDDs on DVR so as to take immediate check and
maintenance in case of HDD failure.
Checking HDD Status in HDD Information Interface
Step 1 Go to Menu > HDD > General.
Step 2 Check the status of each HDD which is displayed on the list, as shown below.
If the status of HDD is Normal or Sleeping, it works normally. If the status is Uninitialized or
Abnormal, please initialize the HDD before use. And if the HDD initialization is failed, please
replace it with a new one.
Checking HDD Status in System Information Interface
Step 1 Go to Menu > Maintenance > System Info > HDD.
Step 2 View the status of each HDD displayed on the list, as shown below.
Digital Video Recorder User Manual
Figure 14-24 Message Box for Disk Clone
Figure 14-25 Check Disk Clone Progress
Figure 14-26 View HDD Status (1)
216
Advertisement
Table of Contents
