Lifting & Placing; Assembly - Grizzly G0818 Owner's Manual

Lifting & Placing
Straining or crushing injury
may occur from improperly
lifting machine or some of
its parts. To reduce this risk,
get help from other people
and use a forklift (or other
lifting equipment) rated for
weight of this machine.
Have an assistant help you remove the machine
from the crate, then roll it into position and press
down on the wheel locking tab (see Figure 5) to
lock it in place.
Wheel
Figure 5. Locking caster assembly (one of four).
Model G0818 (Mfd. Since 10/16)
HEAVY LIFT!
Locking
Tab

Assembly

The machine must be fully assembled before it
can be operated. Before beginning the assembly
process, refer to Needed for Setup and gather
all listed items. To ensure the assembly process
goes smoothly, first clean any parts that are cov-
ered or coated in heavy-duty rust preventative (if
applicable).
To assemble dust collector:
1.
Open access door. Remove protective wrap
from collection drawer, and insert collection
drawer as shown in Figure 6. Close and latch
access door.
Collection Drawer
Figure 6. Installing collection drawer.
Access
Door
-15-