Table of Contents
Advertisement
Inventory
The following is a list of items shipped with your
machine. Before beginning setup, lay these items
out and inventory them.
If any non-proprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
Loose Components (Figure 2)
A. Y-Inlet 4 X 4 X 6" ........................................ 1
B. Collection Drawer ....................................... 1
C. Air Filter Dust Tray ...................................... 1
D. Stainless-Steel Mesh Filter......................... 1
E. Active Carbon Filter .................................... 1
F.
Pleated Micro Filter .................................... 1
A
B
D
Figure 2. Loose components inventory.
-12-
Qty
C
E
F
Hardware (Figure 3)
G. Cap Screws M8-1.25 x 16 .......................... 6
H. Lock Washers 8mm.................................... 6
I.
Flat Washers 8mm ..................................... 6
H
G
Figure 3. Hardware inventory.
NOTICE
If you cannot find an item on this list, care-
fully check around/inside the machine and
packaging materials. Often, these items get
lost in packaging materials while unpack-
ing or they are pre-installed at the factory.
Model G0818 (Mfd. Since 10/16)
Qty
I
Advertisement
Table of Contents
