Philips Lifeline Instructions For Use Manual page 70

HomeSafe AutoAlert Button (7000AHB)
AC Voltage Source
[1]
(VAC)
DC Power Source
(VDC)
Type of Protection
Against Electric Shock
Degree of Protection
Against Electric Shock
Degree of Protection
Against Ingress of
Water
Mode of Operation
GoSafe Mobile Help Button (7000MHB/7100MHB)
AC Voltage Source
[1]
(VAC)
DC Power Source
(VDC)
Type of Protection
Against Electric Shock
Degree of Protection
Against Electric Shock
Degree of Protection
Against Ingress of
Water
Mode of Operation
Sound Pressure Level
[1] The means of isolating the device from the supply mains is by disconnecting the device from the wall outlet.
[2] The capacity restored by the cell varies according to current drain, temperature and cut-off.
[3] Recharging of the backup battery is done automatically, as needed, when the device is plugged into an AC power outlet.
[4] Recharging of the GoSafe Mobile Button battery is done by the user as needed, when connected to the charger.
N/A
3.6 Vdc, 1200mAh , Lithium-thionyl chloride (Li-SOCl2) Primary Battery
[2]
Class II
Type BF Applied Part
Water Resistant (1 meter, for 30 Minutes), IPX7
Continuous
N/A for 7000MHB & 7100MHB.
Battery charger rated: 100-240Vac, 50/60Hz, 0.5A
3.7 Vdc, 920mAh , Lithium Ion Rechargeable
[2]
Class II
Type BF Applied Part
Water Resistant (1 meter, for 30 Minutes), IPX7
Continuous
116-123 dB at 1 kHz (measured 1 cm from the speaker)
Battery
[4]
63