Philips Lifeline Instructions For Use Manual page 55

Delay in Determining Alarms
Reporting high priority help alarms from the End Devices to the Home Communicator is done in less
than a second when generated by a button press.
The HomeSafe AutoAlert and GoSafe Mobile Help Buttons provide an added layer of protection
by being able to detect falls under certain conditions. This takes approximately 30 seconds to
determine that an activity that resembles a fall has occurred. An alarm signal is then sent to the
Home Communicator. If a fall is detected by the 7000MHB when outside of range of the Home
Communicator, the signal is sent directly to the Call Center via the AT&T wireless nework, if available.
Logging Alarms
All alarm events reported to the Call Center are logged by the Call Center. There are no user
accessible logs.
60