Table of Contents
Advertisement
www.aeroplusrc.com
service@aeroplusrc.com
100-125CC Extra 330LT
Congratulations on your purchase of your new AeroPlus RC Extra 330LT. This plane
has been designed to be one of the lightest and highest performance aerobatics planes
anywhere. We hope that you will enjoy this plane and will exceed your expectations in
what a model airplane can be.
Thank you,
AeroPlus RC
Unpacking -
Carefully unpack the model, when opening the plastic bags make sure you do not to cut any covering on
the model. Inspect each item to make sure there was no damage in shipping. If for any reason you are
not happy with any part or are unsure please contact the Dealer that you purchased from.
Covering -
Because of the multiple climate zones encountered on the trip from the factory to you,
some of the covering may have wrinkles. We highly recommend that you take time to re-
seal all covering edges with an iron and to use a heat gun to remove any wrinkles and re-
tighten the covering. It is best to do this now while before the plane is assembled.
*Note: Be careful not let any heat get near parts like the canopy or cowl as this may cause
damage.
Assembly Tips
We also recommend that you go over all the accessible joints with cyano glue. Wick glue
into areas of high stress around the U/C plate and motor box.
Use a quality Thread-lock on all metal to metal joints. Even if your model is electric
powered with lower levels of vibration the thread-lock will ensure that things do not fall
off of your airplane!!
AeroPlus RC Copyright 2014 © All Rights Reserved
Advertisement
Table of Contents
