Adding Or Modifying An Ssid/Vlan With Vlan Protocol Enabled - Proxim ORINOCO AP-2000 User Manual

Performing Advanced Configuration
13. Define the RADIUS Server Profile Configuration for the VLAN/SSID:
• RADIUS MAC Authentication Profile
• RADIUS EAP Authentication Profile
• RADIUS Accounting Profile
If 802.1x, WPA, or 802.11i security mode is used, the RADIUS EAP Authentication Profile must have a value.
A RADIUS Server Profile for authentication for each VLAN shall be configured as part of the configuration options for
that VLAN. RADIUS profiles are independent of VLANs. The user can define any profile to be the default and
associate all VLANs to that profile. Four profiles are created by default, "MAC Authentication", "EAP Authentication",
Accounting", and "Management".
14. Reboot the AP.

Adding or Modifying an SSID/VLAN with VLAN Protocol Enabled

1. Click SSID/VLAN/Security > Wireless-A or Wireless-B.
This tab allows you to select the index of the SSID/VLAN to be added or edited. It also allows you to enable
Security Per SSID, and configure the RADIUS Accounting and Authentication Status, the MAC ACL Status, the
Rekeying Interval, the Security Profile, and the RADIUS Server Profiles for the VLAN.
2. Select the Enable Security Per SSID option. The screen will update to the following:
Figure 4-32 SSID/VLAN Configuration (VLAN Protocol Enabled)
3. Click Add to configure additional SSIDs, VLANs, and their associated security profiles and RADIUS server
profiles, or click Edit to modify an existing VLAN/SSID.
96