Settings; Firmware Update - DEVA Broadcast SmartGen Mini Maintenance And Operation Instruction Manual

Compact rds/rbds encoder with lan & usb connectivity

Table of Contents

SETTINGS

Contains information as regards the encoder's information and allows set-up of the encoder's

Output and Site Name. Factory defaults, Reboot Device and Firmware update could also be

performed via this tab.

The RDS Level is digitally adjusted. Section Output allows Level, Phase, Encoder Mode (Side-

chain or Loop-through) and Synchro Source. The Synchro Source selects the synchronization

source of the RDS subcarrier - Auto, Internal or External.

Section Site Name – is mainly used for informational services. It allows custom name to be set,

so as the encoder could be more distinctive.

Pressing the [Factory Defaults] button will return the device to its factory defaults.

Pressing the [Reboot Device] will reboot the device.

Firmware Update contains information of the Current Firmware Version, and also allows the

device's Firmware to be updated.

To update the device firmware, please follow the next steps:

Select the new firmware file by pressing the [...] ('Browse') button;

Press the "Upload" button;

Wait for the process to complete.

65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria

Tel: +359 56 820027, Fax: +359 56 836700

E-mail: office@devabroadcast.com ,Web: www.devabroadcast.com

- 52 -

Table of Contents