Front Panel - DEVA Broadcast SmartGen Mini Maintenance And Operation Instruction Manual

FRONT PANEL

1. PILOT LOCK - This LED lights when the encoder has locked to the 19kHz stereo pilot
signal from the stereo generator, either in the sidechain or the loop-through mode of encoder
operation.
2. FREE RUN - Will be lit when no 19kHz pilot is present at the PILOT OR MPX INPUT, and
the synchronization source is set to "Auto", the encoder defaults to a crystal-controlled internal
timebase. This enables RDS transmissions with monaural programming. When synchronization
source is set to "Internal", the FREE RUN led blinks every second.
3. RDS DATA - This LED flashes dimly as RDS data is being transmitted, serving as an indication
that the encoder is operating normally. When synchronization source is set to "External", and no
19kHz pilot is present at the PILOT OR MPX INPUT, the LED flashes with period of four blinks
per second to indicate the absence of RDS signal at the encoder's output. If the RDS output is set
to OFF. The LED will not be lit.
4. TA FLAG - This LED flashes whenever the TA flag is raised. REMEMBER: the TA flag is
only temporary. It must be turned off as soon as the announcement ends.
5. LAN - Network Availability LED indicator.
6. USB - This LED lights when the USB port is addressed.
65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria
Tel: +359 56 820027, Fax: +359 56 836700
E-mail: office@devabroadcast.com ,Web: www.devabroadcast.com
- 13 -