Maintenance; Cleaning; Repair; Reset - Bosch AVIOTEC IP starlight 8000 Operation Manual

40 en | Maintenance
10

Maintenance

10.1

Cleaning

It is generally sufficient to use a dry cloth for cleaning, but a moist lint-free cloth or leather
shammy may also be used.
Do not use liquid cleaners or aerosol cleaners.
It is important to keep the lens clean to ensure optimum performance. Dust, grease, or
fingerprints should be removed from the lens surface. When cleaning the lens, take extra care
not to damage the special coating used to reduce light reflections.
–
–
–
10.2

Repair

Notice!
Never open the casing of the unit
The unit does not contain any user-serviceable parts. Refer all repairs to suitable qualified
specialists.
10.3

Reset

Use the factory reset button to restore the unit to its original settings. Any changes to the
settings are overwritten by the factory defaults. A reset may be necessary, for example, if the
unit has invalid settings that prevent it from functioning as desired.
2016.02 | 1.0 | F.01U.318.200
Remove dust with a blower-brush or grease-free soft brush.
Wipe water drops off the lens with a clean soft lint-free cloth and dry the lens surface.
Use special lens cleaning paper or cloth treated with lens cleaning fluid to gently wipe off
any remaining dirt (wipe spirally from the lens center towards the edge).
Operation Manual
AVIOTEC IP starlight 8000
Bosch Sicherheitssysteme GmbH