Uninterruptible Power Supply; Algorithm - Bosch AVIOTEC IP starlight 8000 Operation Manual

12 en | System Overview
Power-over-Ethernet (PoE) allows to use the Ethernet cabling for data transmission and for
supplying power to the network device in the same cable. It is possible to realize long cable
lengths in a PoE network system. The standard power supply for the video-based fire
detection is Power-over-Ethernet. Alternatively, a 12 VDC power connector is available as
accessory.
Power-over-Ethernet can be connected at the same time as a 12 VDC power supply. If auxiliary
power (12 VDC) and PoE is applied simultaneously, the camera selects PoE and shuts off the
auxiliary input.
3.1.2

Uninterruptible Power Supply

An uninterruptible power supply allows electronic devices to keep running for a short period
of time when the primary power source is lost. In case of an electrical power outage, the
video-based fire detection cameras will be supplied by the uninterruptible power supply.
3.2

Algorithm

The intelligent smoke and flame algorithm from Bosch analyzes video frames by means of
characteristic and predefined patterns and variables. The fast detection algorithm is based on
a real-time image processing on the camera firmware.
2016.02 | 1.0 | F.01U.318.200 Operation Manual
AVIOTEC IP starlight 8000
Bosch Sicherheitssysteme GmbH