Table of Contents
Advertisement
SuperTrak66™ User's Manual
Deleting an Existing Array
NOTE: Deleting an array may result in the loss of all data contained on it. Be sure
to back up any needed data before deletion.
1) Select the icon of the array
2) Right-click the icon and choose "Delete" from the pop-up menu.
3) Click the "Yes" button if this is an array you wish to delete. Reboot.
Setting Up E-mail Alert Notification
1) Double-click on the Message Agent icon
email alert notifications. This will reveal the Message Agent main screen.
2) Check the "Email alert on error" box in the Information View (if it is not already
checked).
3) Type in the SMTP server address for your mail server in the "SMTP server"
field. Your network administrator will have this information if you do not know it.
4) Click the "Change" button next to the input field to update SuperCheck
configuration for the SMTP server.
5) Next, set the email address for this machine. The Information View is located
below the "Email alert on error" pane. E-mail reports will seem to originate from
this address. Recipients of these messages may reply to this address.
6) Click on the "Change" button next to the input field to update SuperCheck
configuration for the Email ID.
7) Add users to the "Email Receiver List".
Adding an User to an Email Receiver List
1) Double-click on the Message Agent
email alert notification. This will open the Message Agent main screen. Find
the Information View of the Message Agent screen.
2) If you have not already done so, set up email alert notification(s).
3) Under the "Email receiver list" segment of the Information View, type in the
email address(es) of the user you wish to receive email alert notification(s) in
the "Email address" field.
4) Click on the "Add" button to add any users to the list.
you wish to delete
from where you want to receive
. Add any new user(s) needed for
- 46 -
Chapter 4
Advertisement
Table of Contents
