Maintaining The External Heat Recovery System; Fig. 23 Filter Mat For The Air And Oil Cooler - KAESER SM 7.5 Operator's Manual

Fig. 23
10.6
60
10 Maintenance
10.6

Maintaining the external heat recovery system

Filter mat for the air and oil cooler
Filter mat
1
Cleaning the cooler
A filter mat helps to keep the cooler clean. Despite this fact, the cooler will clog over a period of
time.
Do not use sharp objects to clean the cooler. It could be damaged.
Avoid creating clouds of dust.
1. Carefully remove the filter mat from the retaining frame.
2. Dry brush the oil and air coolers and use a vacuum cleaner to suck up the dirt.
3. Carefully insert the filter mat in the retaining frame.
The air and oil coolers can no longer be properly cleaned?
➤ Have severe clogging removed by an authorized KAESER service representative.
Checking the cooler for leaks
➤ Visual inspection: Did cooling oil escape?
Is a cooler leaking?
➤ Have the defective cooler repaired immediately by an authorized KAESER service repre‐
sentative.
Option W1
Maintaining the external heat recovery system
Deposits in the heat exchanger can significantly reduce its capacity to transfer heat.
Check the heat exchanger regularly for leaks and contamination. Frequency of checking is depend‐
ant on the characteristics of the heat transfer medium.
➤ Have the external heat recovery system checked annually by an authorized KAESER service
representative.
Operator Manual Screw Compressor
SM Tri-Voltage, SIGMA CONTROL 2 9_5875 33 USE