Optical Mode; Operation; Setup Menu - Sonoro MEISTERSTÜCK SO-610 Operating Manual

15

Optical mode

15.1 Operation

Your external player (e.g. audio amplifier) must be connected to the
optical input jack of MEISTERSTÜCK with an audio cable (with optical
connector, not supplied).
To access the
Optical mode,
To start and control
playback,
To mute or restore
the sound output,

15.2 Setup menu

Press SETUP in the optical input mode to access the setup menu (see
chapter "Using the menus"). The following options are available and the
current settings (if applicable) are marked with an asterisk (*).
▪ [Bluetooth headphone]
To connect or disconnect with a Bluetooth headphone, see chapter
"Basic operation".
▪ [System Settings]
See chapter "System Settings".
▪ [Main menu]
To access other playback modes or sleep timer.
i
The optical input is only supporting for the linear PCM, 2 channels
16 bit or 24bit music source.
© sonoro audio GmbH 2017
Press key on the remote control.
Or, press MENU once, then
the navigation knob) to select the Optical mode
and then press OK to confirm.
Perform all playback operations on the
external player.
Press or
or
button.
(or rotate
99