Sonoro MEISTERSTÜCK SO-610 Operating Manual page 77

To pair with a
Bluetooth
headphone
To disconnect a
paired Bluetooth
headphone
78
All operation modes except the Bluetooth
mode, press and hold key on MEISTERSTÜCK
or remote control. Or, press SETUP once, then
+ or – (or rotate the navigation knob) to select
[Bluetooth headphone], then select [Bluetooth
pairing] and then press OK to confirm.
The small Bluetooth headphone icon
blinking and indicating that MEISTERSTÜCK is
ready for pairing. The Bluetooth headphone
icon stops blinking when pairing is
completed. The paired Bluetooth headphone
device name is temporarily shown in the
display.
Note: The pairing process is auto completion
between MEISTERSTÜCK and Bluetooth
headphone. Make sure that your Bluetooth
headphone is already in discovery mode and
ready for pairing, for detail please refers to
your Bluetooth device instruction manual.
Press SETUP once, then + or – (or rotate the
navigation knob) to select [Bluetooth
headphone], then select [Bluetooth
disconnect] and then press OK to confirm.
is
© sonoro audio GmbH 2017