Triumph Tiger 1200 XR 2017 Owner's Handbook Manual page 37

Table of Contents

Advertisement

• Push the joystick left/right or press
the MODE button to scroll through
the riding mode options in the
following order:
– RIDER
– RAIN
– ROAD
– SPORT
– OFF-ROAD
– OFF-ROAD PRO.
The selected mode is activated once the
following conditions for switching modes
have been met:
Motorcycle Stationary - Engine Off
• The ignition is switched ON
• The engine stop switch is in the
RUN position.
Motorcycle Stationary - Engine Running
• Neutral gear is selected or the
clutch is pulled in.
Motorcycle in Motion
Within 30 seconds of selecting a riding
mode the rider must carry out the
following simultaneously:
• Close the throttle
• Pull the clutch in
• Make sure that the brakes are not
engaged (allow the motorcycle to
coast).
Note:
It is not possible to switch into or
out of OFF_ROAD or RIDER modes
whilst the motorcycle is in motion,
if the ABS or TC settings are set to
OFF-ROAD or OFF in either of those
modes.
In this case, the motorcycle must
be brought to a stop before the
riding mode change can take place.
If
a
riding
mode
completed,
the
between the previous riding mode and
the newly selected riding mode until the
change is complete or it is cancelled.
The riding mode selection is now
complete and normal riding can be
resumed.
Instruments
change
is
icon
will
alternate
not
37

Advertisement

Table of Contents
loading

Table of Contents