Triumph Tiger 1200 XR 2017 Owner's Handbook Manual page 85

Table of Contents

Advertisement

Press and release the MODE button on
the left hand switch housing to activate
the riding mode selection menu in the
multifunction display.
OFF-ROAD
OFF-ROAD
MAP
OFF-ROAD
OFF-ROAD
C N S
OFF-ROAD
Riding Mode Selection Menu
Further presses of the MODE button will
scroll through the riding modes in the
following order:
• RAIN
• ROAD
• OFF-ROAD.
Alternatively, the SCROLL button can be
used to scroll up or down through the
riding modes.
Note:
To allow the user to scroll between
each of the modes, there is a short
time-out
to
scrolling to take place before the
highlighted
automatically activated.
Scroll through the riding modes until the
desired mode is highlighted in the
selection window.
The name of the highlighted riding mode
and its currently stored ABS, MAP and
TC settings, are displayed on the left
hand side of the multifunction display.
allow
for
further
riding
mode
The currently active riding mode is
indicated with a border.
1
OFF-ROAD
MAP
2
1.
Selected riding mode
2.
Selected riding mode's ABS, MAP and
TC settings
3.
Currently active riding mode
The riding mode shown in the selection
window is automatically activated once
the time-out has elapsed, and the
following conditions for switching modes
have been met.
Motorcycle Stationary - Engine Off
• The ignition is switched ON.
• The engine stop switch is in the
RUN position.
Motorcycle Stationary - Engine On
• Neutral gear is selected or the
clutch is pulled in.
Motorcycle in Motion
is
Within 30 seconds of selecting a riding
mode the rider must carry out the
following simultaneously:
• Close the throttle
• Pull the clutch in
• Make sure that the brakes are not
engaged (allow the motorcycle to
coast).
Instruments
OFF-ROAD
OFF-ROAD
OFF-ROAD
C N S
OFF-ROAD
3
85

Advertisement

Table of Contents
loading

Table of Contents