Triumph Tiger 1200 XR 2017 Owner's Handbook Manual page 87

In the event of an incomplete riding
mode change:
• Safely bring the motorcycle to a
stop.
• Select neutral gear.
• Turn the ignition OFF and then back
ON again.
• Select the required riding mode.
• Restart the engine and continue
riding.
Warning
Do not stop the engine using the
ignition switch or engine stop switch
whilst the motorcycle is moving.
Always bring the motorcycle to a stop
safely and engage neutral gear prior to
stopping the engine.
Stopping the engine by turning off the
ignition or engine stop switch whilst
the motorcycle is moving can lock the
rear wheel causing loss of motorcycle
control and an accident.
Caution
Do not stop the engine using the
ignition switch or engine stop switch
whilst the motorcycle is moving.
Always bring the motorcycle to a stop
safely and engage neutral gear prior to
stopping the engine.
The transmission
lubricated only when the engine is
running. Inadequate lubrication may
cause damage or seizure of the
transmission, which can lead to sudden
loss of motorcycle control and an
accident.
is pressure
Riding Mode Configuration
Refer to the following table for the ABS,
MAP and TC options available for each
riding mode.
Riding Mode
RAIN
ABS (Anti-lock Braking System)
Road
Off-Road
Off
MAP (Throttle Response)
Rain
Road
Off-Road
TC (Traction Control)
Rain
Road
Off-Road
Off
Key
Standard (Factory Default Setting)
Selectable Option
Option Not Available
Instruments
ROAD OFF-ROAD
87