Removing The Battery; Charging The Battery - Motorola MTP850 Feature User Manual

Removing the Battery

Prerequisites: Turn off the radio.
Procedure:
1 Push the latch.
2 Lift the battery out.
Related Links
Installing the Battery on page 20

Charging the Battery

Depending on a charger type, you can charge a battery alone or/and a battery attached to a radio.
Charging a battery attached to a radio can be done with the radio either turned on or off. Charging with the radio
turned off is recommended since this is more efficient (the battery charges faster).
Important: Motorola approved chargers provide optimum performance. Other chargers may not fully
charge your Motorola Lithium-Ion battery or may reduce the life of the battery.
Prerequisites:
Do not charge the battery in a hazardous area.
Procedure:
1 Connect the charger to an appropriate power source (100–240 V, 12 V), according to the specification of the
charger.
2 Perform one of the following actions:
• Desktop chargers – insert the battery or the radio with the battery attached into the appropriate socket of the
charger. Ensure that the battery/radio made good connection with the charger and that the LED on the charger
is indicating that charging is in progress
• Travel chargers and car chargers – connect the charger to the radio with the battery attached. Ensure that the
charger is firmly connected to the radio and that the radio display is indicating that charging is in progress.
Getting Started | 21
| | Send Feedback