Language; Setting Language; Data Setup; Setting Data Function - Motorola MTP850 Feature User Manual

Language

This sub-menu allows you to change the language of the radio.

Setting Language

Procedure:
1 From the home screen, press the
2 Select Setup → Language.
3 Select desired language.

Data Setup

This menu item allows you to set up your radio to transmit and receive data from the external device.
To connect your radio accessory connector to the external device, use the PMKN4025 cable. The external device
must run an application complying with the TETRA standards.
Note:
• Data services are available only in TMO Mode.
• Data services are blocked in TXI Mode.
• When set to Voice Only, the built in data modem is disabled to conserve battery power.

Setting Data Function

Procedure:
1 From the home screen, press the
2 Select Setup → Data Setup.
3 Select one of the following:
• Voice Only — Your radio receives and transmits voice calls only.
• Data Only — Your radio acts as a modem. It rejects incoming and outgoing voice calls (except for Emergency
Calls), status and text messages.
• Voice & Data — Your radio acts as a modem but voice calls have priority over data calls and can interrupt
them.

Audio

This menu item allows you to adjust your radio audio settings.

Audio Profiles

An audio profile is a set of audio parameters, such as the volume of alert tones, that are configured by your service
provider to fit a particular operating environment. For example, the audio parameters can be adjusted to situations
when the radio operates inside a building or on a noisy street.
If programmed, the radio displays a name of a currently used audio profile (on the home screen) and/or an appropriate
icon associated with the profile (in the status icon area).
Your service provider can configure a maximum of ten audio profiles.
For a detailed description of a specific audio profile, contact your service provider.
key.
MENU
key.
MENU
Main Menu | 83
| | Send Feedback