Setting Automatic Updates For The Time And Date; Energy Economy; Enabling Energy Economy; Viewing The Energy Economy Status - Motorola MTP850 Feature User Manual

Setting Automatic Updates for the Time and Date

Procedure:
1 From the home screen, press the
2 Select Setup → Time & Date → System Update.
3 Select one of the following:
• Off — All the infrastructure informations are ignored. The radio uses internal time and offset.
• Time Only — Time displayed is calculated from the offset programmed by your service provider added or
subtracted from the infrastructure time.
• Time & Offset — Time and offset are updated after receiving from the infrastructure.

Energy Economy

Energy Economy (EE) is a mode of operation to save battery life. Your radio does not monitor all downlink time
slots of the Main Control Channel. If the radio is in the charger, Energy Economy mode is not needed.

Enabling Energy Economy

Procedure:
1 From the home screen, press the
2 Select Setup → Energy Economy → EE Selection.
3 Select one of the following:
• On — Activates Energy Economy feature.
• Off — Deactivates Energy Economy feature.

Viewing the Energy Economy Status

Procedure:
1 From the home screen, press the
2 Select Setup → Energy Economy → EE Status.
3 The Energy Economy status is displayed as:
• Energy Ecnmy Is Supported By System
• Energy Economy Is Currently Not Supported By System

Transmission Power Class

Transmission Power feature enables your radio to choose whether to transmit with Class 3L or Class 4. The signal
strength icon indicates when the radio uses this feature.

Selecting RF Power

When and where to use: If you are entering the area that requires higher signal strength.
Procedure:
1 From the home screen, press the
2 Select Setup → RF Power.
3 Select one of the following:
• Hi RF Power — Activates this feature.
• Normal RF Pwr — Deactivates this feature.
key.
MENU
key.
MENU
key.
MENU
key.
MENU
Main Menu | 91
| | Send Feedback